คอนฟิก MySQL Replication

บทความนี้จะอธิบายวิธีการคอนฟิก Replication ของ MySQL เพื่อทำการ replicate ข้อมูลในฐานข้อมูล (database) จากเครื่องหลัก (Master) ไปยังเครื่องสำรอง (Slave) ได้

หลังจากที่คอนฟิก Replication ถูกต้องเรียบร้อย เมื่อมีการเปลี่ยนแปลงข้อมูลในฐานข้อมูลบนเครื่องหลัก (Master) ไม่ว่าจะเป็นการ INSERT, UPDATE, DELETE หรือ แก้ไข table การเปลี่ยนแปลงนี้จะถูกส่งต่อ (replicate) ไปยังเครื่องสำรอง (Slave) โดยอัตโนมัติ

การคอนฟิก Replication เป็นการป้องกันการเสียหาย ถ้าเครื่องหลักมีปัญหา ข้อมูลที่ถูกเก็บไว้ในเครื่องสำรอง ก็ยังสามารถใช้งานได้

Continue reading “คอนฟิก MySQL Replication”

การแสดงผล Error ของ PHP

การตรวจสอบข้อผิดพลาด (error) เวลาพัฒนาโปรแกรม หรือเมื่อรันโปรแกรม ถือว่ามีความสำคัญอย่างหนึ่ง เพื่อที่จะทำให้ระบบทำงานได้อย่างถูกต้อง

สำหรับการพัฒนา Web Application ด้วย PHP การตรวจสอบหรือแสดงผลข้อผิดพลาด สามารถทำได้ สองวิธีหลักๆ คือ

  1. แสดงข้อผิดพลาด (error) ผ่านหน้าเว็บ
  2. เก็บข้อผิดพลาดไว้ในไฟล์ (log file) เพื่อการตรวจสอบ

Continue reading “การแสดงผล Error ของ PHP”

การใช้งาน DRBD เบื้องต้น

จากบทความ ติดตั้งและคอนฟิก DRBD  เราได้คอนฟิกเป็นแบบ Single-primary mode คือ ณ เวลาใดเวลาหนึ่ง มีเครื่องเดียวเท่านั้นที่สามารถ อ่าน เขียน ข้อมูลได้

ดังนั้นขณะที่เครื่องที่ 1 (centos54-a) ทำหน้าที่เป็น primary ของดิสก์ drbd0 อยู่  เครื่องที่ 2 (centos54-b) จะไม่สามารถ mount ดิสก์ drbd0 นี้ขึ้นมาใช้งานได้

ในบทความนี้จะแสดงการทดสอบใช้คำสั่งเพื่อเปลี่ยนโหมด Primary, Secondary ระหว่างเครื่องทั้งสอง

ตรวจสอบสถานะบนเครื่อง centos54-a

[root@centos54-a ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs         ro                 ds                 p  mounted  fstype
0:r0   Connected  Primary/Secondary  UpToDate/UpToDate  C  /export  ext3
[root@centos54-a ~]# df -h /export
Filesystem            Size  Used Avail Use% Mounted on
/dev/drbd0            950M   18M  885M   2% /export

ทดสอบ mount ดิสก์บนเครื่อง centos54-b

[root@centos54-b ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs         ro                 ds                 p  mounted  fstype
0:r0   Connected  Secondary/Primary  UpToDate/UpToDate  C
[root@centos54-b ~]# mount /dev/drbd0 /export
mount: block device /dev/drbd0 is write-protected, mounting read-only
mount: Wrong medium type

ในกรณีที่ต้องการเปลี่ยนให้เครื่องที่ 2 (centos54-b) ทำหน้าที่เป็น primary  เช่นในกรณีที่ต้องการซ่อมบำรุงเครื่องที่ 1 สามารถทำได้ดังนี้

บนเครื่องที่ 1 ปิดเซอร์วิส DRBD

[root@centos54-a ~]# service drbd stop
Stopping all DRBD resources:
.
[root@centos54-a ~]# service drbd status
drbd not loaded

ตรวจสอบสถานะบนเครื่องที่ 2 หลังจากปิดเซอร์วิสบนเครื่องที่ 1

[root@centos54-b ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs            ro                 ds                 p  mounted  fstype
0:r0   WFConnection  Secondary/Unknown  UpToDate/DUnknown  C

แม้เครื่อง Primary ปิดไปแล้ว บนเครื่องที่ 2 ที่ยังอยู่ในโหมด Secondary ก็ยัง mount ดิสก์ ไม่ได้

[root@centos54-b ~]# mount /dev/drbd0 /export
mount: block device /dev/drbd0 is write-protected, mounting read-only
mount: Wrong medium type

ต้องเปลี่ยนสถานะบนเครื่องที่ 2 ให้เป็น primary ด้วยคำสั่ง drbdadm primary

[root@centos54-b ~]# drbdadm primary all

ตรวจสอบสถานะบนเครื่องที่ 2

[root@centos54-b ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs            ro               ds                 p  mounted  fstype
0:r0   WFConnection  Primary/Unknown  UpToDate/DUnknown  C

เมื่ออยู่ในโหมด primary แล้ว ก็สามารถ mount ดิสก์ขึ้นมาใช้งานได้

[root@centos54-b ~]# mount /dev/drbd0 /export
[root@centos54-b ~]# df -h /export
Filesystem            Size  Used Avail Use% Mounted on
/dev/drbd0            950M   18M  885M   2% /export

ทดลองสร้างไฟล์ในดิสก์ drbd0

[root@centos54-b ~]# cd /export/
[root@centos54-b export]# ls
lost+found
[root@centos54-b export]# echo "hello world from node 2" > test-file-on-node-2.txt
[root@centos54-b export]# ls -l
total 20
drwx------ 2 root root 16384 Feb  6 15:46 lost+found
-rw-r--r-- 1 root root    24 Feb  6 17:17 test-file-on-node-2.txt

รันเซอร์วิส DRBD บนเครื่องที่ 1 ขึ้นมาอีกครั้ง ตอนนี้เครื่องที่ 1 จะทำหน้าที่เป็น Secondary และจะทำการ replicate ข้อมูลมาจากเครื่องที่ 2 (Primary) โดยอัตโนมัติ

[root@centos54-a ~]# service drbd start
Starting DRBD resources: [ d(r0) s(r0) n(r0) ].
[root@centos54-a ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs         ro                 ds                 p  mounted  fstype
0:r0   Connected  Secondary/Primary  UpToDate/UpToDate  C

บนเครื่องที่ 2 เปลี่ยนให้เป็นโหมด Secondary

[root@centos54-b ~]# drbdadm secondary all
0: State change failed: (-12) Device is held open by someone
Command 'drbdsetup 0 secondary' terminated with exit code 11

หากมีการเรียกใช้ดิสก์ drbd อยู่ จะไม่สามารถเปลี่ยนโหมดจาก Primary ไปเป็น Secondary ได้ ต้อง umount ดิสก์ออกไปก่อนถึงจะเปลี่ยนโหมดได้

[root@centos54-b ~]# umount /export
[root@centos54-b ~]# drbdadm secondary all

ตรวจสอบสถานะบนเครื่องที่ 2

[root@centos54-b ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs         ro                   ds                 p  mounted  fstype
0:r0   Connected  Secondary/Secondary  UpToDate/UpToDate  C

เปลี่ยนโหมดบนเครื่องที่ 1 ให้เป็น Primary เพื่อเรียกใช้ดิสก์ได้

[root@centos54-a ~]# drbdadm primary all
[root@centos54-a ~]# service drbd status
drbd driver loaded OK; device status:
version: 8.3.2 (api:88/proto:86-90)
GIT-hash: dd7985327f146f33b86d4bff5ca8c94234ce840e build by mockbuild@v20z-x86-64.home.local, 2009-08-29 14:07:55
m:res  cs         ro                 ds                 p  mounted  fstype
0:r0   Connected  Primary/Secondary  UpToDate/UpToDate  C

mount ดิสก์ และตรวจสอบไฟล์ที่อยู่ใน drbd0 จะเห็นไฟล์ที่สร้างจากเครื่องที่ 2

[root@centos54-a ~]# mount /dev/drbd0 /export
[root@centos54-a ~]# cd /export/
[root@centos54-a export]# ls -l
total 20
drwx------ 2 root root 16384 Feb  6 15:46 lost+found
-rw-r--r-- 1 root root    24 Feb  6 17:17 test-file-on-node-2.txt
[root@centos54-a export]# cat test-file-on-node-2.txt
hello world from node 2

ตรวจสอบไฟล์ /var/log/messages

เมื่อมีปัญหาเกี่ยวกับการใช้ DBRD นอกจากการใช้คำสั่ง service เพื่อตรวจสอบสถานะแล้ว ไฟล์ /var/log/messages จะแสดงการเปลี่ยนแปลงทั้งหมดของ DRBD ที่เกิดขึ้น ซึ่งสามารถนำมาใช้ช่วยในการแก้ปัญหาได้

ตัวอย่างข้อความในไฟล์ /var/log/messages ที่เกิดขึ้น เมื่อมีการเปลี่ยนโหมด

[root@centos54-a ~]# tail /var/log/messages
...
Feb  6 17:19:38 centos54-a kernel: block drbd0: peer( Primary -> Secondary )
Feb  6 17:21:04 centos54-a kernel: block drbd0: role( Secondary -> Primary )
...

ข้อมูลอ้างอิง

ติดตั้งและคอนฟิก DRBD

DRBD (Distributed Replicated Block Device) เป็นโปรแกรมเพื่อใช้ในการ replicate ข้อมูลดิสก์ที่อยู่คนละเครื่องกัน ผ่านทางเน็ตเวิร์ก โดยจะทำในระดับ block ของดิสก์

เมื่อมีการเปลี่ยนแปลงข้อมูลที่อยูในดิสก์เครื่องหนึ่ง (primary) การเปลี่ยนแปลงนั้นจะถูก replicate ไปยังอีกเครื่อง (secondary) โดยอัตโนมัติ

DRBD ประกอบด้วยสองส่วนคือ

1. Kernel module – DRBD ทำหน้าที่ใน kernel โดยจะสร้าง virtual block device คั่นกลางระหว่าง physical disk กับ filesystem ที่สร้างอยู่ ไม่ว่าจะเป็น ext3, ext4, xfs
2. User space administration tools – เป็นโปรแกรมที่ช่วยในการจัดการ DRBD ได้ง่ายขึ้น หลักๆ จะเป็น drbdadm

ในบทความนี้จะแสดงการติดตั้งโปรแกรม DRBD และคอนฟิกเป็นแบบ Single-primary mode คือ ณ เวลาใดเวลาหนึ่ง มีเครื่องเดียวเท่านั้นที่สามารถ อ่าน เขียน ข้อมูลได้

คำเตือน ติดตั้งและคอนฟิก DRBD บนเครื่องทดสอบให้เข้าใจก่อน เพราะบางคำสั่งอาจกระทบข้อมูลดิสก์หรือ partition ที่มีอยู่ในเครื่องได้ ทำให้ข้อมูลเสียหายได้

Continue reading “ติดตั้งและคอนฟิก DRBD”